Description
Airbag for the right seat cushion for CITROËN C5 I and II. Color HZW – Matinal Grey. Passenger seat cushion.
This side airbag is designed for the right-hand passenger seat of Citroën C5 generations I and II. It provides lateral protection for the pelvis and torso in side-impact collisions and is a direct-fit replacement part for vehicles equipped with seat-mounted side airbags. Ideal for professional garages and experienced DIY mechanics searching by part number (96391352ZW, 96541529ZW, 8216GZ).
Key Features
– Direct Fit For Citroën C5 I And II Passenger Seat (Right Side).
– Color: HZW (Matinal Grey) To Match Original Interior Trims.
– OEM-Compatible Part Numbers For Easy Identification And Fast Searchability.
– Designed To Replace A Deployed Or Damaged Seat Cushion Airbag Unit.
Typical Applications And Compatibility
Compatible With Citroën C5 Models: First Generation (C5 I) And Second Generation (C5 II). This unit Is Intended For The Passenger Seat Cushion (Right Side) Where The Airbag Is Integrated Into The Seat Foam/Trim.
How The Part Works
The Seat Cushion Side Airbag Is A Pyrotechnic Inflator Module Mounted Inside The Seat Cushion. In A Detected Side Impact, The Airbag Rapidly Inflates To Cushion The Passenger’S Pelvis And Lower Torso, Reducing The Risk Of Severe Injuries. It Works In Conjunction With The Vehicle’S Crash Sensors, Seat Belt Pretensioners And The Airbag Control System.
Replacement Procedure (Overview)
Replacement Should Be Performed By A Qualified Mechanic Or An Experienced DIYer Who Follows Safety Procedures. Typical Steps:
- Disconnect Battery And Wait Minimum Two Minutes To Reduce Risk Of Accidental Deployment.
- Remove Seat From Vehicle If Required To Access Cushion Fasteners And Connectors.
- Carefully Remove Seat Trim And Foam To Access The Airbag Module; Avoid Cutting Or Damaging Airbag Wiring.
- Unplug The Airbag Electrical Connector Using The Correct Release Tools; Handle Connectors By The Housing, Not The Wires.
- Unbolt The Old Airbag Module And Fit The Replacement Unit Ensuring Correct Orientation And Secure Fastening.
- Reinstall Seat Trim And Refit Seat To Vehicle; Reconnect Battery And Clear Any Fault Codes With Appropriate Diagnostic Equipment.
Installation Recommendations
– Always Disconnect The Battery Before Starting Work And Observe Manufacturer’S Recommended Waiting Time.
– Store And Handle The Airbag Module With The Inflator Facing Away From You; Do Not Apply Electrical Power Or Test The Unit Outside Of Approved Diagnostic Procedures.
– Replace Any Damaged Clips, Fasteners Or Connectors To Ensure Correct Fitment And To Avoid Rattles Or Loose Mounting.
– After Installation, Perform A Full System Check With A Suitable Diagnostic Tool To Confirm That No Airbag Fault Codes Remain.
– If In Doubt, Use A Professional Workshop With Experience In Safety Restraint Systems.
Why The Part Most Often Fails
– Previous Deployment In A Crash: Airbags Are Single-Use Components And Must Be Replaced After Deployment.
– Physical Damage To The Airbag Or Wiring Due To Seat Repairs, Heavy Impact, Or Sharp Objects.
– Corrosion Or Moisture Ingress Into Connectors Causing Poor Electrical Contact Or Short Circuits.
– Improper Removal Or Reinstallation Leading To Damaged Connectors, Clips Or Inflator Damage.
– Age-Related Deterioration In Work Environments With High Humidity Or After Water Intrusion.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C5 I; Citroën C5 II
- Product Codes: 96391352ZW, 8216GZ
- Additional Numbers: 96541529ZW
- Color: HZW – Matinal Grey
- Location: Right Passenger Seat Cushion (Seat-Mounted Side Airbag)
Notes For Professionals
This Airbag Is Supplied As A Replacement Module Intended For Vehicles Originally Fitted With A Seat Cushion Side Airbag. Ensure That Seat Occupancy Sensors And Any Related Harnessing Are Inspected During The Repair. After Installation, Use A Diagnostic Tool To Confirm System Integrity And Clear Crash Data If Applicable.
Conclusion
When You Need A Reliable Seat Cushion Side Airbag For Citroën C5 I Or II, This Unit Matches The Original Fit And Finish (HZW Matinal Grey) And Is Indexed By Common OEM Part Numbers For Easy Sourcing. Follow Proper Safety And Handling Procedures During Replacement To Maintain The Integrity Of The Vehicle’S Occupant Protection System.
