Description
Seat Memory Controller For Citroën C8 Peugeot 807 And Other Models
This seat memory controller is a direct-fit electrical component designed for Citroën C8 and Peugeot 807 vehicles. It stores and recalls driver seat position presets, improving driving comfort and convenience for multiple drivers. Ideal for professional workshops and DIY enthusiasts, the unit is commonly searched by part number 6554H3 and NFP, so listing these codes in your search will help you find the correct replacement quickly.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C8, Peugeot 807 (and compatible models sharing the same seat assemblies)
- Product Codes: 6554H3, NFP
- Other Numbers: Not Specified
Function And Benefits
The controller saves seat position presets and communicates with the seat motors and vehicle electronics to automatically adjust lumbar, fore/aft, and backrest positions when a stored memory is selected. This reduces setup time for drivers, enhances comfort, and helps maintain consistent ergonomics—especially useful in fleet vehicles or cars shared by multiple drivers.
Installation Recommendations
Before any work, always disconnect the vehicle battery and follow the vehicle manufacturer’s recommended procedures. Typical replacement steps for a competent mechanic or experienced DIYer:
- Disconnect the battery and wait a few minutes to ensure electrical systems are fully powered down.
- Remove seat trim panels and access the switch/control module location on the seat side or base.
- Carefully unplug electrical connectors, noting any retaining clips. Avoid pulling on wiring harnesses.
- Unscrew or unclip the existing controller and fit the replacement unit in the same position.
- Reconnect connectors, reassemble trim panels, reconnect the battery and test all memory functions and seat adjustments for full operation.
Exercise caution near occupancy sensors, seatbelt pretensioners and airbag wiring—do not cut or disturb these circuits. If the vehicle requires coding or adaptation of the memory function after installation, this should be performed with appropriate diagnostic equipment.
Why This Part Fails
There Is No Fixed Replacement Interval. Failures Usually Result From Electrical Wear, Moisture Ingress, Or Mechanical Damage To Switch Contacts Or Connectors. Common Symptoms Include Intermittent Operation, Loss Of Stored Presets, Unresponsive Buttons Or Partial Seat Movement. Corrosion Of Connectors And Broken Solder Joints From Long-Term Vibration Are Frequent Causes.
Repair And Diagnostic Tips
- Start With A Visual Inspection Of Connectors And Wiring For Corrosion Or Damage.
- Verify Power And Ground At The Connector With A Multimeter Before Replacing The Unit.
- Check For Fault Codes Related To Seat Position Or Memory Functions With A Diagnostic Tool.
- When Replacing, Keep The Original Part Number (6554H3) Handy As The Primary Search Reference.
This controller is a practical spare for workshops and owners maintaining Citroën C8 and Peugeot 807 vehicles. Searching by the part code 6554H3 or NFP will help ensure correct fitment and faster sourcing.
