Description
Safety Belt For Citroën C8 And Peugeot 807. Right And Left Rear Outer Seats – Behind The Driver And Front Passenger. Color FXX – Black
This used safety belt assembly is a direct-fit replacement for the outer rear seats of Citroën C8 and Peugeot 807 models. Ideal for professional garages and experienced DIYers, the belt matches original mounting points and finish (Color Code FXX – Black). Many technicians and customers search by product codes 14910150XX, 14004997XX or 8974RP — these identifiers are included below to help you find the correct part quickly.
Overview
The safety belt performs the primary role of occupant restraint in normal driving and emergency deceleration. The retractor mechanism allows normal movement but locks under sudden acceleration changes to secure the occupant. This replacement part is suitable for the right and left rear outer seating positions (behind driver and front passenger) on Citroën C8 and Peugeot 807 vehicles. Always inspect webbing, buckles and pretensioners for damage before installation.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C8, Peugeot 807
- Product Codes: 14910150XX, 14004997XX, 8974RP
- Additional Numbers: Color Code FXX (Black)
How To Replace
Replacement of the rear outer seat belt is a straightforward job for a trained technician or competent DIYer with basic tools. General steps:
- Remove interior trim panels that cover the belt anchorage points to access bolts and the retractor.
- Disconnect the battery and wait at least 10 minutes to allow the airbag/pretensioner system to discharge before working on the belt or pretensioner.
- Unbolt the lower anchorage and the shoulder anchor, then remove the retractor retaining bolts and extract the old belt assembly.
- Fit the new belt in the correct routing, hand-thread bolts and then tighten to manufacturer torque settings.
- Refit trim panels and verify belt webbing retracts smoothly and locks under a sharp tug. Check buckle operation.
Installation Recommendations
- Always Disconnect The Battery Before Starting Work On Components With Pretensioners Or Airbag Systems; Wait At Least 10 Minutes.
- Use Manufacturer Torque Specifications For All Fasteners And Follow The Vehicle Repair Manual For Trim Removal To Avoid Damage.
- Do Not Cut, Sew Or Attempt To Repair Damaged Webbing. Replace The Entire Assembly If The Webbing Is Frayed, Burned Or Cut.
- After Installation, Test Belt Retraction And Locking Function. Ensure Correct Routing And That The Buckle Latches Securely.
- If The Belt Contains An Integrated Pretensioner, Confirm It Has Not Been Deployed; Replace The Unit If The Pretensioner Has Activated.
Most Common Failure Causes
Seat belts typically fail or require replacement for the following reasons:
- Deployment In A Collision Causing Pretensioner Activation—After Any Crash, Replace The Affected Belt Assembly.
- Webbing Wear And Tear—Fraying, Cuts Or UV Damage From Long-Term Use Can Compromise Strength.
- Retractor Malfunction—Dirt, Corrosion Or Internal Spring/Winding Damage May Cause Jamming Or Loss Of Locking Function.
- Buckle Failure—Latch Wear Or Contamination Can Prevent Secure Latching.
- Corrosion Of Mounting Points—Especially In Regions With Road Salt Or High Humidity.
Service Life And Inspection
There Is No Fixed Replacement Interval For Seat Belts; Regular Visual Inspections And Functional Checks Are Recommended. Replace The Belt Immediately If You Observe Any Webbing Damage, Binding, Failure To Retract, Or After Any Event That May Have Triggered The Pretensioner.
Keywords For Search
Citroën C8 Seat Belt, Peugeot 807 Seat Belt, Rear Seat Belt 14910150XX, 14004997XX, 8974RP, Safety Belt Black FXX, Seatbelt Retractor Outer Rear
