Description
Additional brake light for Peugeot 307 CC (first and second series). Fully functional, tested.
This high-mounted third brake light (central stop lamp) is a direct-fit replacement for Peugeot 307 CC models from both the first and second series. Ideal for professional workshops and DIY mechanics looking for a reliable, straightforward swap, the unit restores rear visibility and compliance with safety regulations. The assembly is commonly searched by its part numbers (9641298880, 6350W5, 6351R8), so customers often find it by entering these codes in catalogues or search engines.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 307 CC (First And Second Series)
- Product Codes: 9641298880, 6350W5, 6351R8
- Other Numbers: NFP
Installation Recommendations
Replacement can be performed in a standard workshop or at home with basic tools. Typical steps:
- Switch off ignition and, if preferred, disconnect the negative battery terminal to avoid shorts when working with the electrical connector.
- Open the boot and remove the interior trim panel or access cover to reach the high-level stop lamp mounting points.
- Unscrew or release mounting clips securing the lamp assembly; support the unit to prevent it from falling.
- Unplug the electrical connector and remove the old assembly. Check connector contacts for corrosion or damage.
- Fit the new lamp assembly, reconnect the electrical connector, and secure the mounting screws or clips.
- Test the brake light operation (ask an assistant to press the brake pedal or use a brake pedal depressor) before reassembling the interior trim.
- Reinstall trim panels and verify proper fitment and watertight seals around the unit.
For a durable repair, clean and, if necessary, treat electrical contacts with dielectric grease. Replace broken clips or seals to prevent water ingress. Use the listed product codes to ensure correct fitment.
Why This Part Fails Most Often
The third brake light typically has no scheduled service interval and often lasts many years, but common failure causes include:
- Water Ingress Or Seal Degradation Causing Corrosion Of Contacts
- Electrical Connector Corrosion Or Loose Connections
- Impact Or Body Damage To The Rear Hatch On Convertibles
- Internal Lamp Or LED Module Failure Due To Age Or Thermal Stress
- Broken Mounting Clips Or Vibration Damage Leading To Poor Sealing
Inspecting the unit for moisture and securing mounts during installation reduces the risk of premature failure.
Keywords: Peugeot 307 CC third brake light, high-mounted stop lamp, 9641298880, 6350W5, 6351R8, third brake lamp replacement for 307 CC.
