Description
Door check/hinge for Right Front Door for PEUGEOT 207
Color EXL – Obsidian Black Paint
Front Passenger Door
Product Description
This genuine-style door check/hinge is designed for the right front (passenger) door of the Peugeot 207. Identified by part code 9035T4 and finish code EXLD, the component limits door travel, holds the door in set positions and prevents the door from swinging freely. Built for durability and correct fitment, it restores smooth opening and closing action and maintains factory alignment when replacing a worn or damaged unit.
Technical Information
- Manufacturer: Peugeot / Stellantis
- Model: Peugeot 207
- Product Codes: 9035T4
- Additional Numbers: EXLD (paint/finish code)
Fitment And Compatibility
Fits Right Front (Passenger) Door Of Peugeot 207. Frequently Searched Under Part Number 9035T4 Or Colour Code EXLD. Compatible With Vehicles Using The Same Door Check Mounting Points And Finish.
Function And Common Failure Modes
The door check controls the door opening angle, holds the door in intermediate positions and prevents it from overextending. Typical failure causes include corrosion of the metal components, wear of the pivot and pawl mechanism, damage from side impacts or accidents, and paint/finish deterioration leading to accelerated corrosion. Symptoms of a failing unit are rattling, uneven door movement, inability to hold the door open or visible play in the hinge area.
Replacement Procedure
Basic Replacement Steps (For Experienced Mechanics Or Competent DIYers):
- Support The Door Securely To Prevent Sagging (Use A Jack Or Helper).
- Remove Any Interior Trim Necessary To Access Mounting Bolts On The Door And B-Pillar.
- Loosen And Remove The Mounting Bolts Securing The Old Door Check To Both The Door And The B-Pillar.
- Remove The Old Unit, Transfer Any Retaining Clips Or Seals If Required, And Fit The New Unit In The Correct Orientation.
- Hand-Start Bolts, Align The Door To Ensure Proper Closing, Then Tighten Bolts To Manufacturer Torque Specifications.
- Lubricate Pivot Points With Suitable Grease And Refit Interior Trim Components.
- Check Door Operation Multiple Times Across Full Travel And Ensure Door Holds In Intermediate Positions.
Installation Recommendations
- Use Correct Grade Fasteners And Replace Any Damaged Bolts Or Clips.
- Apply Anti-Seize Or Threadlocker According To Manufacturer Guidance Where Appropriate.
- Ensure The Door Is Properly Supported During Work To Avoid Misalignment Or Damage.
- Inspect Surrounding Mounting Points And Door Hinges For Corrosion Or Wear; Address Any Underlying Issues To Maximize Service Life.
- After Installation, Verify Door Alignment, Latch Engagement And Weatherseal Fitment.
Why This Part Most Often Fails
Exposure To Moisture And Road Salt Leads To Corrosion Of The Pivot And Fasteners. Repeated Use Causes Mechanical Wear Of The Pawl And Notches That Control Door Holding Positions. Side Impacts Or Door Slams Can Bend Or Break The Check Mechanism. Paint Damage (Especially Around The Mounting Area) Accelerates Rust And Reduces Component Life.
Notes For Mechanics And DIYers
Part Number 9035T4 And Finish Code EXLD Are Common Search Terms Used By Professionals And Enthusiasts When Sourcing This Component. Replacing The Door Check Restores Safe, Controlled Door Movement And Prevents Further Damage To The Door Seal And Hinges.
