Description
Decorative instrument cluster trim for Citroën C3 II A51. Finish KDK – HICKORY
This decorative trim frame for the instrument cluster restores the interior finish of Citroën C3 II (A51) dashboards and is intended for professional workshops and DIY mechanics. It matches the original Stellantis styling and fitment, improving cabin appearance and protecting the instrument cluster edges from wear. Frequently searched by part number, this item is identified under the codes listed below for fast lookup and ordering.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C3 II (A51)
- Product Codes: 96842894ZD, 96842894K1
- Other Numbers: 96842894ZD 96842894K1
- Finish: KDK – HICKORY
- Category: Interior – Instrument Cluster Surround
Function And Benefits
The frame serves a primarily cosmetic and protective role: it conceals the joint between the instrument cluster and dashboard, provides a uniform factory appearance, and prevents dust ingress at the edges. Using the correct part ensures precise alignment with the instrument cluster bezels, vents and mounting clips for a secure, rattle-free fit.
Compatibility
Designed to fit Citroën C3 II (A51) instrument clusters. Customers commonly locate this part by its product codes 96842894ZD and 96842894K1. Verify vehicle model designation A51 when selecting the part to ensure correct fitment.
Installation
Removal and replacement is straightforward for an experienced technician or competent DIYer:
- Park vehicle on a flat surface and set parking brake. If work requires accessing areas near airbags, follow safety procedures below.
- Use soft plastic trim removal tools to release bezel clips to avoid scratching surrounding trim.
- If screws secure the bezel, remove fasteners (retain screws for reuse).
- Carefully disengage the original frame from mounting points and lift away the cluster trim.
- Position the new frame, align clips and fasteners, then press gently until all clips engage. Refit any screws.
- Check for correct fitment, ensure no gaps or interference with instrument cluster operation.
Mounting Recommendations
- Work With Proper Trim Tools: Use plastic pry tools to avoid scratches and damaged clips.
- Airbag Safety: If work is close to airbag modules, disconnect the vehicle battery and wait the manufacturer’s recommended time before proceeding.
- Torque And Fasteners: Reuse original fasteners where possible and tighten to manufacturer specification if known.
- Inspect Clips: Replace any broken or worn clips to ensure a secure, vibration-free installation.
Why This Part Typically Fails
Decorative trim frames generally fail for cosmetic or mechanical reasons rather than functional electrical faults. Common causes include:
- Plastic Embrittlement: Long-term UV exposure and heat cycles can make plastic brittle, causing cracks.
- Broken Clips: Repeated removal or forceful pry during repairs can snap mounting clips, leading to looseness or rattles.
- Impact Or Wear: Minor collisions or blunt impacts to the dash can crack or deform the trim.
Additional Notes
Replacement improves interior aesthetics and eliminates rattles from loose trim. Typical replacement time is short (often 15–30 minutes) depending on vehicle trim level and whether screws or hidden clips are present. Search using the product codes above for fast identification.
Order this precise instrument cluster trim to restore the original finish of your Citroën C3 II (A51) dash and ensure an accurate, secure fit.
