Description
Left Driver’s Side Rearview Mirror For Peugeot 207
Electrically Operated, Heated
7 (5+2) Pin Connector
Color KKN – Aden Red Paint
Missing Plastic For Side Indicator
Product Overview
Replacement left (driver) exterior mirror for Peugeot 207 with electric adjustment and heated glass. This unit uses a 7 (5+2) pin connector and is finished in Aden Red (color code KKN). The housing is missing the plastic part that contains the side turn signal, so the indicator lens/trim will need to be transferred from the original mirror or acquired separately. Ideal for professional workshops and competent DIYers looking for a direct-fit solution identified by part codes 96806498XT / 8149ZG.
Features And Function
- Electric Mirror Adjustment: Motor-driven positioning for precise alignment from the cabin.
- Heated Mirror Glass: Built-in heating element reduces fogging and ice build-up for improved visibility in cold conditions.
- 7 (5+2) Pin Connector: Provides the electrical interface for adjustment and heating (standard connector layout for many Peugeot 207 variants).
- Driver Side Fitment: Left-hand (driver) side mirror designed for Peugeot 207 bodies.
- Note About Indicator: Plastic trim with side indicator is not included.
Installation Recommendations
Recommended for fitment by experienced technicians or skilled DIYers. General replacement steps:
- Remove inner door trim or triangular trim cover to access mirror mounting bolts and connector.
- Unplug the electrical connector and remove the mounting screws/bolts holding the mirror to the door.
- Carefully remove the old mirror assembly; transfer the indicator housing or other small trim pieces if required (this unit is missing the side indicator plastic).
- Fit the replacement mirror, secure mounting bolts to the manufacturer’s specification, reconnect the electrical connector and check for correct operation of adjustment and heating functions before reassembling the trim.
- Avoid overtightening plastics; ensure wiring is routed without pinching and that connectors are fully seated.
Most Common Failure Causes
- Impact Damage: Collisions or knocks are the most frequent cause of mirror breakage or housing damage.
- Motor Wear Or Gear Damage: Repeated use and contamination can lead to adjustment motor or gearbox failure.
- Water Ingress And Corrosion: Moisture entering the housing or connector may corrode contacts and cause intermittent or permanent electrical faults.
- Connector Or Wiring Damage: Broken wires, poor contacts, or damaged pins can interrupt power to the heating element or adjustment motor.
- Frozen Or Seized Mechanisms: Lack of lubrication and exposure to ice can prevent movement and overload motors.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 207
- Product Codes: 96806498XT, 8149ZG
- Other Numbers: KNN (reference), KKN (color code)
- Connector: 7 (5+2) Pin
- Side: Left (Driver)
- Color: Aden Red (KKN)
Notes For Professionals
This unit is suitable for repair shops and knowledgeable DIY installers. Because the plastic trim for the side indicator is missing, plan to reuse that part from the donor mirror or order the trim separately to complete the exterior appearance and signaling function. After installation, verify mirror adjustment range and heating operation as part of the vehicle’s exterior lighting and comfort checks.
